OSHA Standards and Bubba’s Material Handling, Inc.

OSHA Standards and Bubba’s Materials Handling, Inc

  1. Highest priority standards
  1. Other working surfaces, 1910.30-the company has many machines, which have to be located in the appropriate manner, so as to guarantee safety
  2. Powered platforms for building maintenance, 1910.66- the company has permanent powered platforms for building maintenance
  3. Manlifts, 1910.30-the company uses manlifts to transport goods where they should be
  4. ventilation, 1910.94- some of the activities in the company cause contaminated air
  5. Occupational noise exposure, 1910.95- some of the activities during the fabrication process are noisy
  6. Compressed gases (general information), 1910.101-the company uses different compressed gases in some of the machines
  7. Acetylene, 1910.102-the company uses acetylene in welding, and has to ensure that it is stored and used safely
  8. Flammable and combustible liquids, 1910.106-some of the liquids and chemicals  used in the company such as acetylene and xylene are combustible
  9. Storage and handling of liquefied petroleum gas, 1910.110- the company uses LP gas to power forklifts
  10. General requirements for dipping and coating operations, 1910.124- the company uses coating operations when it paints
  11. Eye and face protection, 1910.133- this is especially important in almost all the company operations such as welding and painting
  12. Safety color code for marking physical hazards, 1910.144- the company deals with flammable material
  13. Permit-required confined spaces, 1910.146-the company fits the profile of a confined space. It is large enough for employees to enter and work, and it is not designed for continuous occupancy
  14. Powered industrial trucks, 1910.178-the company uses trucks to transport the finished goods to storage, and load them for transportation.
  15. Oxygen-fuel gas welding and cutting, 1910.253- the company uses oxy-acetylene torch in welding
  1. Written programs required by the company
  1. Chemical safety program-It is important for the company to have a chemical safety program so that employees can know how to handle chemicals, and thus protect themselves from chemical hazards. All corrosives and flammables should be identified, and have safety precautions.
  2. Confined space entry-the employees should know all the confined spaces. It is important to know of all the confined spaces, so that one can know of the possible hazards. Having a program for confined space entry will enable the employees to know of the safety procedures such as safe work, rescue, exit, and entry procedures.
  3. General safety and health policy rules- Bubba’s Materials Handling, Inc has many activities and procedures. The general safety and health policy rules will enable the employees to know what to do when they encounter problems and issues that are not covered by specific regulations. Employers should ensure that the employees have a safe working environment in all the departments and sections of the company
  4. Industrial hygiene-the company should inform all the employees about the possible heath hazards in the company. The program is necessary because it lets the employees know the person who is authorized to handle any hazardous chemicals, and the persons responsible for handling the company equipment

Standards requiring training

  1. Storage and handling of liquefied petroleum gas- this is a highly sensitive area in many organizations and companies using LP gas. Employees need to have training in this area so that they can know how to handle LPG. Employers should not assume that the employees know how to use the gas properly. In case an accident happens and the gas leaks, it can be easy to ignite a fire and the results can be disastrous
  2. Eye and face protection some employers assume that employees know how to use protective equipment in the right way. However, this is not the case, as employees often end up using the equipment in the improper manner. The equipment fails to protect the employees, and this results to accidents and injuries at the work place
  3. Powered industrial trucks-powered industrial trucks such as forklifts and manlifts can be hazardous to the employees, if they do not know how to use it well. Although the employees may have had experiences as truck drivers elsewhere, the employers should continue training them, especially if they change the model or make of the machines that the employees know
  4. Oxygen-fuel gas welding and cutting-it is important to train employees how to use oxygen-fuel machines for welding and cutting because this will reduce accidents in the work place. Employers should ensure that employees know how to use all the equipment, especially because it contains flammable gases, which can be dangerous
  5. Safety color code for marking physical hazards- employers should inform the employees when they have marked all the physical hazards with color codes. Employees need to know the color that relates to a specific color code so that they can avoid accidents in the workplace.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Reference:

OSHA (n. d.). Occupational safety and health administration. United States Department of Labor. Retrieved from http://www.osha.gov/pls/oshaweb/owasrch.search_form?p_doc_type=STANDARDS&p_toc_level=1&p_keyvalue=1910

Order Now

Last Completed Projects

topic title academic level Writer delivered

Are you looking for a similar paper or any other quality academic essay? Then look no further. Our research paper writing service is what you require. Our team of experienced writers is on standby to deliver to you an original paper as per your specified instructions with zero plagiarism guaranteed. This is the perfect way you can prepare your own unique academic paper and score the grades you deserve.

Use the order calculator below and get started! Contact our live support team for any assistance or inquiry.

[order_calculator]